ambergrs memory map:

00000-1FFFF: Motherboard RAM
20000-9FFFF: EEMS mapped in conventional
A0000-AFFFF: EGA hole, QRAM mapped EEMS
B0000-B3FFF: MDA hole, QRAM mapped EEMS
B4000-B7FFF: QRAM mapped EEMS
B8000-BBFFF: CGA
BC000-BFFFF: Empty
C0000-C7FFF: EGA/VGA/PGA ROM hole, QRAM mapped UMB (EEMS)
C8000-C9FFF: HDD
CA000-CBFFF: HDD hole, empty
CC000-CDFFF: PC Network hole, empty
CE000-CFFFF: NIC RAM
D0000-DFFFF: EMS 3.2 page frame
E0000-EFFFF: QRAM mapped UMB (EEMS)
F0000-FFFFF: ROM

Potential allocations:
Deallocate 40000-9FFFF motherboard RAM, allocate it to XMA/EEMS/EMS 4.0
Fill EGA, MDA, and between MDA and CGA holes: A0000-B7FFF (will XMA even do this?)
Fill the hole between CGA and the ROM hole: BC000-BFFFF
Fill the EGA/VGA ROM hole: C0000-C7FFF
Fill the D0000-DFFFF ROM space
EMS page frame: E0000-EFFFF

Total conventional RAM: 736k, 480k bankswitchable
Total space to load high: 112k - one block of 64k (D0000-DFFFF), one block of 48k (BC000-C7FFF)

Potential conflicts:
Lo-Tech XT-CFv3 wants 32k at C8000-CFFFF or D0000-D7FFF - may be able to work around this by putting the boot ROM on the NIC, to reduce it to CA000-CBFFF

ambergrs I/O and slot usage map:
Slot 1: 218-219 (EEMS), 2C0-2C7? (RTC), 378-37F (LPT1:), 3F8-3FF (COM1:)
Slot 2: 3D0-3DF (CGA)
Slot 3: 3F0-3F7 (Floppy)
Slot 4: 
Slot 5: 320-323 (HDD)
Slot 6: 
Slot 7: 280-29F (NIC)
Slot 8: 

Potential allocations:
COM2: Slot 2+4, 2F8-2FF
XT-CFv3: Slot 6 or 8, 300-31F

Potential conflicts:


ambergrs IRQ map:
  2: NIC
  3: 
  4: COM1:
  5: HDD
  6: Floppy
  7: LPT1:
  
Potential allocations:
COM2: 3

Potential conflicts:


ambergrs DMA map:
  1: 
  2: Floppy
  3: HDD
  
Potential allocations:
XT-CFv3: 3

Potential conflicts:
Two mass storage controllers enter, one leaves. XT-CFv3 can have DMA shut off (at which point, XT-CF-lite makes more sense), though.